202314-BThe most common requirement in gas purification is to remove a wide spectrum of impurities from the supply gas, and the ZPure PolyGas Purifiers are designed with this in mind.The ZPure Glass PolyGas I Purifier removes O2, H2O, CO2, CO, halogenated compounds, siloxanes, hydrocarbons heavier than butane, sulfur-containing molecules, and ammonia form inert gases, He, Ar, N2 and H2. It can be used to provide end-point detection for use with other ZPure Filters. It contains highly sensitive visual indicators for oxygen and water contamination. The indicators signal oxygen breakthrough when the adsorbent changes from green to grey and the moisture indicator changes from blue to brown.The ZPure Glass Filters and Purifiers are available with standard compression fittings or quick connect fittings in 1/4” and 1/8” brass and stainless steel.LIÊN HỆ:Email: info.esteco@gmail.comĐiện thoại: +84 979 987 250..

  202283-BThe ZPure H2O HSMI Filter removes water to low ppb levels from gas streams. The high-sensitivity visual indicator signals depletion when exposed to moisture at levels of 1ppm or more. This is an advanced-design gas purifier for applications requiring high-efficiency moisture removal with a highly sensitive moisture indicator. The adsorbing materials are Molecular Sieve 5A and a HSMI™ indicator, held in a sturdy glass tube. The gas to be purified contacts only glass, metal and the adsorbents.Dual Seal Design: In this design the heavy-walled inner glass tube is protected by a sealed outer plastic tube. This design provides extra protection if the glass tube were to fail, the gas system is still fully protected against leaks. An internal frit at each end prevents particulate contamination.The ZPure Glass Filters and Purifiers are available with standard compression fittings or quick connect fittings in 1/4” and 1/8” brass and stainless steel. LIÊN HỆ:Email: info.esteco@gmail.comĐiện thoại: +84 979 987 250..

  202256Removes water and C5 weight and heavier hydrocarbons from air or inert gases. The inner glass tube contains activated carbon, Co-Free™ moisture indicator and molecular sieve. The CoFree changes from greenish-yellow to blue at low relative humidity to warn of leaks in the gas stream. Gas lines are protected from dust by 10um frits at both ends of the filter. Dual Seal Design: In this design the heavy-walled inner glass tube is protected by a sealed outer plastic tube. This design provides extra protection if the glass tube were to fail, the gas system is still fully protected against leaks. An internal frit at each end prevents particulate contamination. The ZPure Glass Filters and Purifiers are available with standard compression fittings or quick connect fittings in 1/4” and 1/8” brass and stainless steel. LIÊN HỆ:Email: info.esteco@gmail.comĐiện thoại: +84 979 987 250..

  202230-BThe ZPure H2O Filter removes moisture from inert gases, He, Ar, N2, H2, methane and clean dry air (CDA) to low ppb levels, with very high capacity. It is recommended for any application that requires ultra-dry gas, and is available in 4 sizes of stainless steel cylinders ranging from 130 cc to 750 cc. The ZPure H2O Filter is available with standard compression fittings or quick connect fittings offered in ¼” and 1/8” brass and stainless steel, or metal push-to-connect fittings in ¼” and 6 mm for plastic tubing and non-carrier gas lines.LIÊN HỆ:Email: info.esteco@gmail.comĐiện thoại: +84 979 987 250..

  202212D-BThe ZPure CO2 Filter removes carbon dioxide from inert gases, He, Ar, N2, H2, and clean dry air (CDA) to low ppb levels. The filter functions by consuming carbon dioxide in a reaction with highly-dispersed NaOH on a silicate support. The reaction produces water which remains adsorbed in the purifier. In highly critical applications consideration should be given to using an additional moisture trap after the CO2 Filter as a safety measure. It is available in 4 sizes of stainless steel cylinders ranging from 130 cc to 750 cc. The ZPure CO2 Filter is available with standard compression fittings and quick connect fittings offered in ¼” and 1/8” brass and stainless steel, or metal push-to-connect fittings in ¼” and 6 mm for plastic tubing. LIÊN HỆ:Email: info.esteco@gmail.comĐiện thoại: +84 979 987 250..

  205705Standard Mounting Kit for Filters / Traps / Purifiers (With Hardware) . To be used with 130 cc and 475 cc Stainless steel ZPure Filters.This kit can also be used with all ZPure glass indicating purifiers and 88 cc or 116 cc SPure Filters.LIÊN HỆ:Email: info.esteco@gmail.comĐiện thoại: +84 979 987 250..

  202206-BProtect the stationary phase of your column from oxygen and water degradation with the ZPure Dual Filter. It is a compact purifier designed for GC/MS carrier gas lines to improve baseline and sensitivity. *This item ships as a hazardous small quantity exception LIÊN HỆ:Email: info.esteco@gmail.comĐiện thoại: +84 979 987 250..